Tank Connection Locations

The inlet and outlet in the treatment vessel should be located at opposite sides—one high and one low—with respect to the bottom of the tank. Generally, it is most convenient to introduce the influent stream on the surface of the tank and to locate the outlet at the bottom of the vessel.

Variations in the location of the inlet and outlet can considerably change the dead time. Reversing the flow through the tank so that the inlet is on the bottom and the outlet is at the surface, for example, causes the dead time to increase by a factor of 2 or 3. Examination of the flow patterns in the tanks (Figure 7.40.15) shows that the path from inlet to outlet can be doubled by this change. The additional dead time is attributable to the swirl effect of the agitator, which is minimized, but not eliminated, by baffling.

Solar Stirling Engine Basics Explained

Solar Stirling Engine Basics Explained

The solar Stirling engine is progressively becoming a viable alternative to solar panels for its higher efficiency. Stirling engines might be the best way to harvest the power provided by the sun. This is an easy-to-understand explanation of how Stirling engines work, the different types, and why they are more efficient than steam engines.

Get My Free Ebook

Post a comment