Settling Or Clarification

Settling processes remove settleable solids by gravity settling either prior to or after biological or chemical treatment and between multiple-stage biological or chemical treatment steps. In larger tanks, mechanical scrapers accumulate the solids at an underflow withdrawal point, whereas in smaller and some older systems, a hopper bottom is used for solids collection. Solids move down the sloped tank bottom by gravity in hopper-bottom tanks. Both circular and rectangular tank shapes are used. A rectangular or square tank uses the land area more efficiently and environmental engineers can save construction costs by nesting units and using common walls. With circular tanks, this cannot be done.

Settling tanks are commonly designed based on the overflow rate, the unit volume of flow per unit of time divided by the unit of tank area (gallons per day per square foot). Typical overflow rates are 600 gpd per ft2 for primary settling, 1000 gpd per ft2 for intermediate settling, 800 to 1000 gpd per ft2 for final clarifiers after activated-sludge units, and 700 to 1000 gpd per ft2 for final clari-fiers after trickling filters. The detention times for settling range from 1 to 2.5 hr for average flows depending on the processes before or after the settling step.

Project Earth Conservation

Project Earth Conservation

Get All The Support And Guidance You Need To Be A Success At Helping Save The Earth. This Book Is One Of The Most Valuable Resources In The World When It Comes To How To Recycle to Create a Better Future for Our Children.

Get My Free Ebook


Post a comment