Process Description

Historically, SS have been removed from wastewater by gravity sedimentation. The removal efficiency of this unit operation is a function of the presence of readily settleable solids. Typical municipal wastewater contains about 50 to

100 mg/l of difficult-to-settle SS. These very small particles have densities approaching that of the suspending medium (water). Typically, these solids are bacteria, viruses, colloidal organic substances, and fine mineral solids. The precipitation of chemical agents causes these difficult-to-settle solids to flocculate (particle growth) and become settleable.

Chemical treatment can also precipitate certain dissolved pollutants, forming a settleable suspension. For example, phosphate is precipitated by aluminum (Al3+), and heavy metals are precipitated as hydroxides when the pH is raised.

During the middle and late 1800s, chemical treatment was implemented in about 200 sewage treatment plants in England. During the 1930s, the United States became interested in chemical treatment. However, these users recognized that chemical treatment alone does not remove putrescible dissolved organics and is therefore not a complete treatment process. Interest in chemical treatment of municipal wastewater increased in the 1960s due to new and stringent requirements concerning phosphorus removal.

Project Earth Conservation

Project Earth Conservation

Get All The Support And Guidance You Need To Be A Success At Helping Save The Earth. This Book Is One Of The Most Valuable Resources In The World When It Comes To How To Recycle to Create a Better Future for Our Children.

Get My Free Ebook

Post a comment