Physical Characteristics of Sludge

Sludges are almost always characterized by their solids concentration. Often, environmental engineers use the sludge volume index (SVI) to describe sludge settling characteristics. Unfortunately, the SVI is an unsatisfactory parameter and should only be used for plant control and other applications in which comparing two or more sludges is not necessary. A better means of describing sludge physical characteristics is sludge rheology.

Almost all slurries, especially wastewater treatment sludges, are thixotropic and pseudoplastic fluids (see Figure 7.19.1). As shown in Figure 7.19.2, they exhibit an apparent yield strength, a parameter that environmental engineers can use to describe sludge behavior. Rheograms (see Figure 7.19.2) can be constructed for any sludge provided that the proper tools are used. Unfortunately, rheo-logical data are difficult to obtain because viscometers (Liptak 1995) must be modified before the sludge can be analyzed. Nevertheless, environmental engineers should measure the rheological properties and relate them to other physical or biological characteristics under study.

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment