Particle Size Abrasiveness and Other Physical Characteristics

Figure 10.3.2 shows a representative particle size distribution for MSW based on research by Hilton, Rigo, and Chandler (1992). Environmental engineers generally estimate size distribution by passing samples of MSW over a series of screens, beginning with a fine screen and working up to a coarse screen. As shown in the figure, MSW has no characteristic particle size, and most components of MSW have no characteristic particle size.

MSW does not flow, and piles of MSW have a tendency to hold their shape. Loads of MSW discharged from compactor trucks often retain the same shape they had in-

Waste Category

FIG. 10.3.2 Representative size distribution of MSW. (Adapted from D. Hilton, H.G. Rigo, and A.J. Chandler, 1992, Composition and size distribution of a blue-box separated waste stream, presented at SWANA's Waste-to-Energy Symposium, Minneapolis, MN, January 1992.)

side the truck. When MSW is removed from one side of a storage bunker at an MSW combustion facility, the waste on the other side generally does not fall into the vacated space. This characteristic allows the side on which trucks dump waste be kept relatively empty during the hours when the facility receives waste.

MSW tends to stratify vertically when mixed, with smaller and denser objects migrating toward the bottom and lighter and bulkier objects moving toward the top. However, MSW does not stratify much when merely vibrated.

Although MSW is considered soft and mushy, it contains substantial quantities of glass, metal, and other potentially abrasive materials.

Project Earth Conservation

Project Earth Conservation

Get All The Support And Guidance You Need To Be A Success At Helping Save The Earth. This Book Is One Of The Most Valuable Resources In The World When It Comes To How To Recycle to Create a Better Future for Our Children.

Get My Free Ebook


Post a comment