Optical Sensor

Optical consistency meters use a sample cell through which polarized light is passed. Because only solids scatter polarized light, the amount of depolarization is a measure of SS concentration or consistency. Another optical consistency detector operates in the IR region and uses a self-cleaning, multiple fiber-optic probe as its sensor (see Figure 7.9.3). The probes can be inserted into the pipeline to adjustable depths through an isolating ball valve (2 in or 50 mm) and can monitor the consistency in the range of 2 to 6%.

Summary

While convenient from an installation standpoint, inline instruments are sensitive to flow variations. Fixed sensors are often plagued by material buildup, particularly if the sample contains fibers. Rotating sensors are self-cleaning because the sensor motion spins off any material; however, variations in shaft seal friction can be troublesome. The flow-bridge method of consistency measurement is applicable to a range of materials with better accuracy than the other instruments. Since this instrument is not installed inline, the process flow need not be shut down for instrument maintenance.

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment