Coriolis flowmeters have the following limitations:

1. They are not available for large pipelines. The largest Coriolis flowmeter has a maximum flow rating of 25,000 lb/min (11,340 kg/min) and is equipped with 6-in. (15-cm) flanges. Larger flow rates require more than one flowmeter mounted in parallel.

2. Some flowmeter designs require high fluid velocities to achieve significant time or phase difference between the flow detector signals. These high velocities can result in high pressure drops across the flowmeter.

3. Coriolis flowmeters are expensive. However, the cost of a Coriolis meter is often comparable to (or below) the cost of a volumetric meter plus a densitometer used together to determine the mass-flow rate.

4. Coriolis flowmeters have difficulty measuring the flow rate of low-pressure gas. Applications with pressures less than 150 psig are marginal with the flowmeter designs currently available. Low-pressure gases have low density, and their mass-flow rate is usually low. Generating sufficient Coriolis force requires a high gas velocity. This high velocity can lead to prohibitively high pressure drops across the meter.

Project Earth Conservation

Project Earth Conservation

Get All The Support And Guidance You Need To Be A Success At Helping Save The Earth. This Book Is One Of The Most Valuable Resources In The World When It Comes To How To Recycle to Create a Better Future for Our Children.

Get My Free Ebook

Post a comment