Lime And Limesoda Ash Softening

To reduce hardness to 80 or 100 mg/l, the lime or limesoda ash softening processes may be used. These processes are used when some hardness can be tolerated, as in domestic water supplies. The operational cost of these processes is much less than for the ion exchange process. In lime softening, calcium is removed as follows:

Calcium Lime Calcium bicarbonate carbonate

The calcium carbonate is insoluble and precipitates out. If noncarbonate hardness such as calcium sulfate is also present, soda ash must be added:

Ca2+ + SOf" + Na2CO3 ® CaCO3^ + 2Na+ + SOf"

Sulfate

Soda ash

Similar reactions are involved in magnesium precipitation.

e 1999byCRCIPeesLLL

FIG. 8.3.3 Summary of hardness removal processes.

Since lime is used in excess, the softened water still contains Ca2+ and OH~ ions that must be stabilized (Figure 8.3.3). This can be done by bubbling carbon dioxide through the water (recarbonation). Water softening operations are usually followed by flocculation, settling, and filtration.

Project Earth Conservation

Project Earth Conservation

Get All The Support And Guidance You Need To Be A Success At Helping Save The Earth. This Book Is One Of The Most Valuable Resources In The World When It Comes To How To Recycle to Create a Better Future for Our Children.

Get My Free Ebook


Post a comment