Dosage And Performance

Wastewater treatment facilities can introduce the ozone-containing air or oxygen mixture produced by the ozone generator (1 or 2% ozone) into the water by injecting or diffusing it into a mixing chamber, spraying the water into an ozone-rich atmosphere, or discharging the ozone into a scrubber. Disinfection is faster with ozone and less influenced by pH and temperature variations than with chlorine.

The ozone concentration needed for disinfection depends on the chemicals and contaminants in the water and the concentration of microorganisms. A dosage of 0.2 to 0.3 ppm ozone is sufficient to kill all coliform bacteria in clean water if it is free of all oxidizable chemicals. Municipal water treatment facilities often use a dosage of 1.5 ppm to disinfect as well as remove taste, odor, and color. For the disinfection of tertiary biological sewage treatment plant effluents, a dosage of 6 ppm is sufficient. For secondary effluent, 15 ppm is required. This dosage also reduces BOD and COD.

Ozone kills viruses even more rapidly than bacteria. Electron microscopic examination indicates that viruses appear to have exploded. Ozone is also more effective than chlorine in destroying other hard to kill organisms, such as spores.

Ozone is also toxic to humans. The maximum allowable concentration in air for an 8-hr period is 0.1 ppm by volume (see Figure 7.30.14).

Project Earth Conservation

Project Earth Conservation

Get All The Support And Guidance You Need To Be A Success At Helping Save The Earth. This Book Is One Of The Most Valuable Resources In The World When It Comes To How To Recycle to Create a Better Future for Our Children.

Get My Free Ebook

Post a comment