Detritus Tanks

Detritus tanks remove a mixture of grit and organic matter. The width and shape of the grit chamber are not critical with this design, but the surface area (which relates to settling velocity) is. The area requirements are proportional to the settling velocity of the grit particle and to the waste-water flow rate.

The settled grit is conveyed to a common collection sump. A raking or conveying mechanism washes and removes the grit from the chamber in a clean and drained condition, and the turbulence created by the raking mechanism washes the organic or putrescible material out of the grit. This rejected material is discharged back into the collection tank. Figure 7.15.3 shows a degritting unit of this design.

For detritus tanks, grit removal capacity is proportional to surface area. Multiplying the unit area given in Table 7.15.1 by the maximum wastewater flow expected gives the total area of the tank.

The normal design of detritus tanks is based on the removal of at least 65-mesh-size particles with a unit area requirement of 38.6 ft2 per mgd. At this design rate, 95% of all grit coarser than 65-mesh is removed. Minimum velocities are not critical. Settled organic matter is washed from the grit in the classifier and returned to the process.

Project Earth Conservation

Project Earth Conservation

Get All The Support And Guidance You Need To Be A Success At Helping Save The Earth. This Book Is One Of The Most Valuable Resources In The World When It Comes To How To Recycle to Create a Better Future for Our Children.

Get My Free Ebook


  • aaron
    What is destritus tank in waste water?
    3 years ago
  • clotilde palermo
    What is detritus tank?
    2 years ago

Post a comment