Chlorine Dosage

In determining the amount of chlorine required for disinfection, environmental engineers must consider the pH. The state of New York recommends that for drinking water at a pH of 7.0, the concentration of free-available-chlorine residual after a 10-min detention time should be 0.2 mg/l. For a pH of 8.0 with the same detention time, the concentration of free-chlorine residual should be 0.4 mg/l. At pH values of 7 and 8, the recommended combined-available-chlorine residuals are 1.5 and 1.8 mg/l, respectively, after a contact period of 60 min.

For waste treatment plant effluents, a combined-chlorine residual of 0.5 mg/l after 15 min is generally acceptable (although some states require as much as 2 mg/l). Providing a residual of 0.5 mg/l requires a much larger dosage, depending on the efficiency of prior treatment, be-

Project Earth Conservation

Project Earth Conservation

Get All The Support And Guidance You Need To Be A Success At Helping Save The Earth. This Book Is One Of The Most Valuable Resources In The World When It Comes To How To Recycle to Create a Better Future for Our Children.

Get My Free Ebook

Post a comment