Biological Oxidation

Two basic techniques, fixed-bed and fluid-bed, are used in conventional biological treatment. The trickling filter has a fixed-bed of stone or plastic packing material that provides a growth surface for zoogleal bacteria and other organisms. The intermittent-sand filter and the spray irrigation system are other examples of the fixed-bed technique.

The activated-sludge processes and sewage lagoons are fluid-bed systems. The activated-sludge process uses mechanical aeration and returns a percentage of the active sludge to the process influent. Lagoons or stabilization ponds and oxidation ditches do not routinely waste sludge, but multipond systems can have recirculation. Septic tanks and Imhoff tanks combine the settling and biological oxidation processes in a single tank.

Activated Sludge

Activated-sludge processes use continuous agitation and artificially supplied aeration of settled sewage together with recirculation of a portion of the active sludge that settles in a separate clarifier back to the aeration tanks. These processes vary in detention time, the method of mixing and aeration, and the technique of introducing the waste and recirculated sludge into the aeration tank.

Figure 7.21.2 is a conventional activated-sludge plant flow diagram. A return of activated sludge at a rate equal to about 25% of the incoming wastewater flow is normal; however, plants operate with recirculation rates from 15 to 100%. The mixture of primary clarifier overflow and activated sludge is called mixed liquor. The detention time is normally 6 to 8hr in the aeration tank.

Project Earth Conservation

Project Earth Conservation

Get All The Support And Guidance You Need To Be A Success At Helping Save The Earth. This Book Is One Of The Most Valuable Resources In The World When It Comes To How To Recycle to Create a Better Future for Our Children.

Get My Free Ebook


Post a comment