Biological Discs

A biological disc unit consists of a series of closely spaced, large-diameter, expanded polystyrene discs mounted on a horizontal shaft. The discs are partially immersed in waste-water and rotated.

From the microorganisms present in the wastewater, a biological growth develops on the surface of the discs. As the discs rotate, the bacteria alternately passes through the wastewater and the air. Operating in this manner, the discs provide support for microbial growth and alternately contact this growth with organic wastewater pollutants and air.

The rotational speed, which controls the contact intensity between the biomass and the wastewater, and the rate of aeration can be adjusted according to the organic load in the wastewater. Biological disc units are available in sizes up to 12 ft in diameter.

The residence time of the wastewater in the disc sections and the rotational speed of the discs determine unit BOD removal efficiency. Installing a number of discs in a series of stages improves the residence time distribution and yields a greater BOD removal efficiency.

Staged operation is advantageous when the wastewater contains several types of biodegradable materials because staging enhances the natural development of different biological cultures in each stage. For example, the discs in the later stages are dominated by nitrifying bacteria that oxidize ammonia after most of the carbonaceous BOD has been removed. Staged operation also permits the use of intermediate solids separation units at strategic points. The process is claimed to be stable under hydraulic surges and intermittent flows.

The approximate cost of a bio-disc unit is 25i per gal per day of domestic sewage, excluding site work. Because of the high buoyancy of the disc materials and the low rotational speeds, the power consumption is low. For domestic wastewater, power consumption can be 10 hp per mgd. This rate is approximately equivalent to removing 4.2 lb of BOD per hp-hr invested.

For sewage flow capacities of 5000 to 120,000 gpd, a package unit is available (see Figure 7.24.3). It includes a feed mechanism, a section of bio-disk surfaces, an integral clarifier tank with sludge removal mechanism, and a chlorine contact section. Depending on the nature of the influent sewage and on the total flow capacity, the length of the package unit varies from 10 to 40 ft.

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment