Assuring Performance

Key control parameters used to trigger fail-safe controls are presented in Table 11.14.5. The parameters are divided into three groups:

Group A parameters are continuously monitored and interlocked to the automatic waste feed cutoff. Group B parameters are set to ensure that worst-case conditions demonstrated in the trial run are not exceeded during continuous operation. They are not linked with the automatic waste cutoff. Group C parameters are based on equipment manufacturers' design and operating specifications. They are set independently of trial-run results and are not linked with automatic waste feed cutoff.

No individual real-time monitoring performance indicators appear to correlate with actual organic DRE. No correlation between indicator emissions of CO or HC and DRE has been demonstrated in field-scale incinerator operations, although CO is a conservative indicator of organic emissions. It may be that combinations with other potential real-time indicators, such as surrogate destruction, may be desirable.

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment