Applications

The aerobic lagoon is applicable to lower strength wastes (usually with a BOD of less than 200 mg/l), which are not toxic to an algal system. The anaerobic lagoon is applicable to high-strength wastes (usually greater than 500 mg/l of BOD) and applications in which a highly purified effluent is not required. In anaerobic lagoons, either the sulfate concentration must be low (less than 100 mg/l), or the lagoon must be in a remote location. The facultative lagoon is applicable to wastes of approximately 200 to 500 mg/l BOD concentration. The waste cannot be toxic to algae or contain a large sulfate concentration.

In all three lagoons, a large amount of land must be available since each lagoon requires many acres for construction. Lagoons are much less susceptible to upsets from accidental discharges or large loading variations than other methods of biological treatment. Therefore, they are applicable in these situations.

Frequently, more than one type of lagoon is used. For example, additional effluent treatment from an anaerobic lagoon can be provided in a facultative or aerobic lagoon. The initial treatment in an anaerobic lagoon often renders the waste more amenable to aerobic treatment. The use of two lagoons in series further purifies the effluent and requires less land area.

Project Earth Conservation

Project Earth Conservation

Get All The Support And Guidance You Need To Be A Success At Helping Save The Earth. This Book Is One Of The Most Valuable Resources In The World When It Comes To How To Recycle to Create a Better Future for Our Children.

Get My Free Ebook


Post a comment