1

Note: ┬░Pounds of polymer added per ton of dry solids in the feed.

Note: ┬░Pounds of polymer added per ton of dry solids in the feed.

European practice currently recovers 90 to 95% of solids during dewatering. Because the need for such high recoveries has not been fully proven, the United States practice cannot justify the increased equipment and polymer costs and the resulting wetter cakes. In the United States, the usual requirements are in the range of 80 to 90% recovery, with a trend to lower recoveries, particularly in connection with wholly aerobic plants in which the return sludge quantities are large.

Many waste treatment plants are providing for chemical treatment to remove phosphate. Lime is frequently favored in many western states, and alum or iron salts is favored in the eastern states. The addition of lime at any point in the process produces sludge that is best treated in conveyor centrifuges either for high recovery with anionic polymers or for classification. Alum is commonly added before the secondary biological sludge clarifier but has little effect on centrifugal dewatering except for the shift to an anionic polymer. Alum (tertiary) treatment of secondary biological effluent produces sludge similar to water-treatment alum sludge.

Sludge containing appreciable quantities of iron salts often is amenable to clarification and dewatering in a con veyor centrifuge. Lime sludge from water softening is readily dewatered in conveyor centrifuges producing dry cakes (see Table 7.48.4). In simple water treatment by alum, resultant sludge quality and cake concentration obtained in an imperforate bowl knife centrifuge seem to be a function of the turbidity of the raw water.

Project Earth Conservation

Project Earth Conservation

Get All The Support And Guidance You Need To Be A Success At Helping Save The Earth. This Book Is One Of The Most Valuable Resources In The World When It Comes To How To Recycle to Create a Better Future for Our Children.

Get My Free Ebook


Post a comment