FIG. 7.41.1 Approximate titration curve for the Fe2+/Ce4+ system.

where n = 2. As stated in Equation 7.39(4) that [OH—][H+] = Kw = 1 X 10—14 at 25°C and —log [H+] = pH, Equation 7.41(17) can be written as follows:

0.0591 [CNO—] (Emeter) CN = —1.169 + log ^^ + 0.0591(14 — pH)

Equation 7.41(18) shows the importance of the pH in the ORP process. If the pH is unknown and controlled, the meter reading is useless. When the process is controlled at pH = 9; (Emeter)CN at the half-titration point can then be calculated as follows:

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook

Post a comment