00056

pH

(2)

(2)

Source: Code of Federal Regulations, Title 40, Chap. 1, part 419—Petroleum refining point source category, 419-457 (1 July 1991).

Notes: 1In any case where the applicant can demonstrate that chloride ion concentration in the effluent exceeds 1000 mg/l (1000 ppm), the Regional Administrator can substitute TOC as a parameter in lieu of COD. Effluent limitations for TOC shall be based on effluent data from the plant correlating TOC to BOD5. If the Regional Administrator judges that adequate correlation data are not available, the effluent limitations for TOC shall be established at a ratio of 2.2 to 1 to the applicable effluent limitations on BOD5.

2Within the range of 6.0 to 9.0.

3Feedstock denotes the crude oil and natural gas liquids fed to the topping units.

Source: Code of Federal Regulations, Title 40, Chap. 1, part 419—Petroleum refining point source category, 419-457 (1 July 1991).

Notes: 1In any case where the applicant can demonstrate that chloride ion concentration in the effluent exceeds 1000 mg/l (1000 ppm), the Regional Administrator can substitute TOC as a parameter in lieu of COD. Effluent limitations for TOC shall be based on effluent data from the plant correlating TOC to BOD5. If the Regional Administrator judges that adequate correlation data are not available, the effluent limitations for TOC shall be established at a ratio of 2.2 to 1 to the applicable effluent limitations on BOD5.

2Within the range of 6.0 to 9.0.

3Feedstock denotes the crude oil and natural gas liquids fed to the topping units.

tics and composition of individual wastewater streams can be obtained.

A survey of aircraft paint stripping wastewater generated at U.S. Navy facilities is an example of industrial wastewater characterization. The survey was conducted at six Naval Air Rework Facilities (NARFs). The field survey at each NARF was conducted for periods ranging from 5 to 7 days (Law, Olah, and Torres 1985). The waste-

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment