Figures

Figure 1. Schematic of Crossed Cylinder Test Apparatus.

Figure 2. Schematic of Block-on-Ring Test.

Figure 3. Wear-scar Volume Equation for Block in Block-on-Ring Test.

Figure 4. Schematic of a Typical Pin-on-Disc System.

Figure 5. Schematic of a Taber Abraser Apparatus.

Figure 6. Schematic of the Dry Sand

Rubber Wheel Test Apparatus.

Figure 7. Schematic of Pin-on Drum Abrasion Tester.

Figure 8. Schematic of the Alumina

Slurry Abrasion Tester.

Figure 9. Schematic of the Jaw Crusher Gouging Abrasion Tester.

Figure 10. Schematic of Solid Particle Erosion Equipment.

Figure 11. Plot of Erosion Wear vs. Impingement Angle.

Figure 12. Plot of Erosion Wear vs. Particle Velocity.

Figure 13. Three Dimension Plot of

Erosion Wear vs. Impingement Angle and Particle Velocity.

Figure 14. Schematic of Bureau of Mines Slurry Tester.

Figure 15. Profile of Erosion Crater from Jet Impingement Test.

Figure 16. Alumina Erosion of Diffusion Alloyed Co-WC, Comparison of Methods to Calculate Wear.

Figure 17. High Stress Abrasion of

Diffusion Alloyed Co-WC as a Function of Depth of Treatment.

Figure 18. Alumina Erosion of Diffusion Alloyed Co-WC.

Figure 19. Silica Erosion of Diffusion Alloyed Co-WC.

0 0

Post a comment