References

1. R. German, Particle Packing Characteristics, Metal Powder Industries Federation, 1989

2. ABAQUS/Standard User's Manual, Version 5.7, Vol 1-3, Hibbitt, Karlsson, & Sorensen, Inc., Providence, RI, 1997

3. N. Aravas, On the Numerical Integration of a Class of Pressure-Dependent Plasticity Models, Int. J. Numer. Meth. Eng., Vol 24, 1987, p 1395-1416

4. Y. Kergadallan, G. Puente, P. Doremus, and E. Pavier, Compression of an Axisymmetric Part, Proc. of the Int. Workshop on Modelling of Metal Powder Forming Processes (Grenoble, France), 1997, p 277-285

5. K.T. Kim, J. Suh, and Y.S. Kwon, Plastic Yield of Cold Isostatically Pressed and Sintered Porous Iron under Tension and Torsion, PowderMetall., Vol 33, 1990, p 321-326

6. H.A. Kuhn and C.L. Downey, Material Behavior in Powder Preform Forging, J. Eng. Mater. Technol., 1990, p 41-46

7. S. Shima and M. Oyane, Plasticity Theory for Porous Metals, Int. J. Mech. Sci., Vol 18, 1976, p 285-291

8. S.B. Brown and G.A. Weber, A Constitutive Model for the Compaction of Metal Powders, Modern Developments in Powder Metallurgy, Vol 18-21, 1988, MPIF, p 465-476

9. T.J. Watson and J.A. Wert, On the Development of Constitutive Relations for Metallic Powders, Metall. Trans. A, Vol 24, 1993, p 2071-2081

10. A.R. Akisanya, A.C.F. Cocks, and N.A. Fleck, The Yield Behaviour of Metal Powders (1996), Int. J. Mech. Sci., Vol 39 (No. 12), 1997, p 1315-1324

11. S. Brown and G. Abou-Chedid, Yield Behaviour of Metal Powder Assemblages, J. Mech. Phys. Solids, Vol 42 (No. 3), 1994, p 383-399

12. W. Prager, Proc. Inst. Mech. Eng., Vol 169, 1955, p 41

13. R. Hill, The Mathematical Theory of Plasticity, Oxford University Press, 1950

14. E. Pavier and P. Doremus, Mechanical Behavior of a Lubricated Powder, Advances in Powder Metallurgy & Particulate Materials-1996, Vol 2 (Part 6), Metal Powder Industries Federation, 1996, p 27-40

15. C.J. Yu, R.J. Henry, T. Prucher, S. Parthasarathi, and J. Jo, Advances in Powder Metallurgy & Particulate Materials, Vol 6, Metal Powder Industries Federation, 1992, p 319-332

16. N.A. Fleck, L.T. Kuhn, and R.M. McMeeking, Yielding of Metal Powder Bonded by Isolated Contacts, J. Mech. Phys. Solids, Vol 40, 1992, p 1139-1162

17. N.A. Fleck, On the Cold Compaction of Powders, J. Mech Phys. Solids, Vol 43 (No. 9), 1995, p 1409-1431

18. J. Gollion, D. Bouvard, P. Stutz, H. Grazzini, C. Levaillant, P. Baudin, and J.P. Cescutti, On the Rheology of Metal Powder during Cold Compaction, Proc. Int. Conf. on Powders and Grains, Biarez and Gourves, Ed., Clermont-Ferrand, France, 4-8 September 1989, p 433-438

19. R.M. Govindarajan and N. Aravas, Deformation Processing of Metal Powders, Part 1: Cold Isostatic Pressing, Int. J. Mech. Sci., Vol 36, 1994, p 343-357

20. A.L. Gurson, Continuum Theory of Ductile Rupture by Void Nucleation and Growth, Part 1: Yield Criteria and Flow Rules for Porous Ductile Media, J. Eng. Mater. Technol., Vol 99, 1977, p 2-15

21. A.C.F. Cocks, The Inelastic Deformation of Porous Materials, J. Mech. Phys. Solids, Vol 37 (No. 6), 1989, p 693-715

22. Y-M. Liu, H.N.G. Wadley, and J. Duva, Densification of Porous Materials by Power-Law Creep, Acta Metall. Mater., Vol 42, 1994, p 2247-2260

23. A.R. Akisanya, A.C.F. Cocks, and N.A. Fleck, Hydrostatic Compaction of Cylindrical Particles, J. Mech. Phys. Solids, Vol 42 (No. 7), 1994, p 1067-1085

24. Z. Qian, J.M. Duva, and H.N.G. Wadley, Pore Shape Effects during Consolidation Processing, Acta Metall. Mater., Vol 44, 1996, p 4815

25. P. Ponté Castañeda and M. Zaidman, Constitutive Models for Porous Materials with Evolving Microstructure, J. Mech. Phys. Solids, Vol 42, 1994, p 1459-1497

26. K.T. Kim and J. Suh, Elastic-Plastic Strain Hardening Response of Porous Metals, Int. J. Eng. Sci., Vol 27, 1989, p 767-778

27. S. Brown and G. Abou-Chedid, Appropriate Yield Functions for Powder Compacts (1992), Scr. Metall. Mater., Vol 28, 1993, p 11-16

28. D C. Drucker and W. Prager, Q. Appl. Math., Vol 10, 1952, p 157-165

29. A.L. Gurson and T.J. McCabe, Experimental Determination of Yield Functions for Compaction of Blended Powders, Proc. MPIF/APMI World Cong., on Powder Metallurgy and Particulate Materials (San Francisco), Metal Powder Industries Federation, 1992

30. A. Schofield and CP. Wroth, Critical State Soil Mechanics, McGraw-Hill, 1968

31. D.M. Wood, Soil Behavior and Critical State Soil Mechanics, Cambridge University Press, 1990

32. S. Shima, "A Study of Forming of Metal Powders and Porous Metals," Ph.D. thesis, Kyoto University, 1975

33. Y. Morimoto, T. Hayashi, and T. Takei, Mechanical Behavior of Powders in a Mold with Variable Cross Sections, Int. J. Powder Metall. Powder Technol., Vol 18 (No. 1), 1982, p 129-145

34. J.R.L. Trasorras, S. Armstrong, and T.J. McCabe, Modeling the Compaction of Steel Powder Parts, Advances in Powder Metallurgy & Particulate Materials-1994, Vol 7, American Powder Metallurgy Institute, 1994, p 33-50

35. J. Crawford and P. Lindskog, Constitutive Equations and Their Role in the Modeling of the Cold Pressing Process, Scand. J. Metall., Vol 12, 1983, p 271-281

36. J.R.L. Trasorras, T.M. Krauss, and B.L. Ferguson, Modeling of Powder Compaction Using the Finite Element Method, Advances in Powder Metallurgy, Vol 1, T. Gasbarre and W.F. Jandeska, Ed., American Powder Metallurgy Institute, 1989, p 85-104

37. B.L. Ferguson, et al., Deflections in Compaction Tooling, Advanced in PM & Particulate Materials, Vol 2, Metal Powder Industries Federation, 1992, p 251-265

38. H. Chtourou, A. Gakwaya, and M. Guillot, Assessment of the Predictive Capabilities of the Cap Material Model for Simulating Powder Compaction Problems, Advances in Powder Metallurgy & Particulate Materials-1996, Vol 2 (Part 7), Metal Powder Industries Federation, 1996, p 245-255

39. D.T. Gethin, R.W. Lewis, and A.K. Ariffin, Modeling Compaction and Ejection Processes in the Generation of Green Powder Compacts, Net Shape Processing of Powder Materials, 1995 ASME Int. Mechanical Engineering Congress and Exposition, AMD-Vol 216, S. Krishnaswami, R.M. McMeeking, and J.R.L. Trasorras, Ed., The American Society of Mechanical Engineers, 1995, p 27-45

40. J.R.L. Trasorras, S. Krishnaswami, L.V. Godby, and S. Armstrong, Finite Element Modeling for the Design of Steel Powder Compaction, Advances in Powder Metallurgy & Particulate Materials-1995, Vol 1 (Part 3), Metal Powder Industries Federation, 1995, p 31-44

41. S. Krishnaswami and J.R.L. Trasorras, Modeling the Compaction of Metallic Powders with Ductile Particles,Simulation of Materials Processing: Theory, Methods and Application, Shen and Dawson, Ed., Balkema, Rotterdam, 1995, p 863-858

42. Powder Compaction Simulation Software (PCS Elite) User's Manual, Concurrent Technologies Corp., Johnstown, PA

43. H-A. Haggblad, P. Doremus, and D. Bouvard, An International Research Program on the Mechanics of Metal Powder Forming, Advances in Powder Metallurgy & Particulate Materials-1996, Vol 2 (Part 7), Metal Powder Industries Federation, 1996, p 179-192

44. B. Wikman, H.A. Haggblad, and M. Oldenburg, Modelling of Powder-Wall Friction for Simulation of Iron Powder Pressing, Proc. of the Int. Workshop on Modelling of Metal Powder Forming Processes (Grenoble, France), July 1997, p 149-158

45. E. Pavier and P. Doremus, Friction Behavior of an Iron Powder Investigated with Two Different Apparatus, Proc. of the Int. Workshop on Modelling of Metal Powder Forming Processes (Grenoble, France), July 1997, p 335-344

46. J. Hallquist, "NIKE2D-A Vectorized, Implicit, Finite Deformation, Finite-Element Code for Analyzing the Static and Dynamic Response of 2-D Solids," Technical report UCRL-19677, Lawrence Livermore National Laboratory, Livermore, California, 1993

0 0

Post a comment