References cited in this section

1. P.C. Mathur, D. Apelian, and A. Lawley, Analysis of Spray Deposition, Acta Metall., Vol 37, 1989, p 429

2. S. Annavarapu and R.D. Doherty, Evolution of Microstructure on Spray Forming, Int. J. Powder Metall., Vol 29, 1993, p 331

3. C. Cai, S. Annavarapu, and R.D. Doherty, Modeling-Based Microstructural Control in Spray Forming, Proc. of the Second Int. Conf. on Spray Forming, ICSF II (Swansea, U.K.), J.V. Wood, Ed., Woodhead Publishing, Cambridge, U.K., 1993, p 67

4. P.S. Grant, Spray Forming, Prog. Mater. Sci., Vol 39, 1995, p 497

5. E.J. Lavernia and Y. Wu, Spray Atomization and Deposition, John Wiley & Sons, 1996

11. A.G. Leatham, Commercial Spray Forming: Exploiting the Metallurgical Benefits, Mater. World, Vol 4,

1996, p 317

27. C. Cai, "A Modeling Study for Design and Control of Spray Forming," Ph.D. dissertation, Department of Materials Engineering, Drexel University, 1995

29. R.D. Doherty, "Modeling for Microstructural Control," Final Report N00014-89-J-P0001, Office of Naval Research, Arlington, VA, 1996

30. S.J. Pien, H. Ding, and M.K. Chyu, Modeling of the Multi-Phase Transport Phenomena and Solidification in a Spray Forming Process with a Linear Nozzle, Sprayforming, Vol 2, K. Bauckhage and V. Uhlenwinkel, Ed., Kolloquium des SFB, University of Bremen, 1997, p 17

31. M.C. Flemings, Solidification Processing, McGraw-Hill, 1974

32. S. Annavarapu and R.D. Doherty, Inhibited Coarsening of Solid-Liquid Microstructures in Spray Casting at High Volume Fraction Solid, Acta Metall. Mater., Vol 43, 1995, p 3207

33. R.D. Doherty, E.A. Feest, and H.-I. Lee, Microstructure in Stir-Cast Alloys, Mater. Sci. Eng., Vol 65, 1984, p 181

34. M. Gundoz and J.D. Hunt, The Measurement of the Solid-Liquid Interfacial Energies in the Al-Cu, Al-Si, and Pb-Sn Systems, Acta Metall., Vol 33, 1985, p 1641

35. S. Ashok, Comments on Evolution of Microstructure on Spray Forming, Int. J. Powder Metall., Vol 30, 1994, p 141

36. R. Kozarek, Alcoa Technical Center (Alcoa, PA), private communication

37. R.D. Doherty, C. Cai, and L.K. Warner-Kohler, Modeling and Microstructural Development in Spray Forming, Int. J. Powder Metall., Vol 33, 1997, p 50

38. R.D. Payne, M.A. Matterson, and A.L. Moran, Application of Neural Networks in Spray Forming, Int. J. Powder Metall., Vol 29, 1993, p 345

39. M.A. Matterson, R.D. Payne, C.J. Madden, and A.L. Moran, An Approach to Modeling the Spray Forming Process with Artificial Neural Networks, Proc. of the Second Int. Conf. on Spray Forming, ICSF II (Swansea, U.K.), J.V. Wood, Ed., Woodhead Publishing, Cambridge, U.K., 1993, p 105

40. A.L. Moran, C.J. Madden, and R.E. Rebis, Industrialization and Certification of Large Diameter Spray Formed Superalloy Components for Military Applications, Proc. of the Second Int. Conf. on Spray Forming, ICSF II (Swansea, U.K.), J.V. Wood, Ed., Woodhead Publishing, Cambridge, U.K., 1993, p 165

41. M.G. Chu, Microstructure of Aluminum Alloy Deposits Produced by Spray Forming with a Linear Nozzle, Sprayforming, Vol 2, K. Bauckhage and V. Uhlenwinkel, Ed., Kolloquium des SFB, University of Bremen,

1997, p 115

42. W.G. Watson, Thermal and Microstructural Characterization of Spray Cast Copper Alloy Strip, Proc. of the First Int. Conf. on Spray Forming, ICSF I (Swansea, U.K.), Osprey Metals, Neath, U.K., 1990, p 19

43. M.G. Benz, T.F. Sawyer, W.T. Carter, R.J. Zabala, and P.L. Dupree, Nitrogen in Spray Formed Superalloys, Proc. of the Second Int. Conf. on Spray Forming, ICSF II (Swansea, U.K.), J.V. Wood, Ed., Woodhead Publishing, Cambridge, U.K., 1993, p 171

44. P.S. Grant, R.P. Underhill, W.T. Kim, K.P. Mingard, and B. Cantor, Grain Growth in Spray Formed Al

Alloys, Proc. of the Second Int. Conf. on Spray Forming, ICSF II, J.V. Wood, Ed. (Swansea, U.K.), Woodhead Publishing, Cambridge, U.K., 1993, p 45

45. R.P. Underhill, P.S. Grant, and D.B. Cantor, Grain Growth in Spray-Formed Ni Superalloys, J. Mater. Synth. Process., Vol 3, 1995, p 171

46. H. Biloni and W.J. Boettinger, Solidification, Physical Metallurgy, 4th ed., R.W. Cahn and P. Haasen, Ed., Elsevier Science B.V., 1996, p 670

0 0

Post a comment