References cited in this section

4. E.J. Hall, Process for Disintegrating Metal, U.S. Patent 1,659,291, 14 February 1928

5. A. Unal, Influence of Nozzle Geometry in Gas Atomization of Rapidly Solidified Aluminium Alloy, Mater. Sci. Technol., Vol 4, 1988, p 909-915

6. S.P. Mates and G.S. Settles, High Speed Imaging of Liquid Metal Atomization by Two Different Close-Coupled Nozzles, Advances in Powder Metallurgy and Particulate Materials, Vol 1, T.M. Cadle and K.S. Narasimhan, Ed., Metal Powder Industries Federation/APMI, 1996, p 1-67 to 1-80

7. A. Unal, Effect of Processing Variables on Particle Size in Gas Atomization of Rapidly Solidified Aluminium Powders, Mater. Sci. Technol., Vol 3, 1987, p 1029-1039

8. A. Unal, Gas Flow in Atomization Nozzles, Proc. Int. Symp. on Physical Chemistry of Powder Metals

Production and Processing (St. Mary's, PA), W.M. Small, Ed., The Minerals, Metals and Materials Society, 1989

9. N.J. Grant, in Industrial Materials Science and Engineering, Marcel Dekker, L.E. Murr, Ed., 1984, p 243272

10. L. Gerking, Powder from Metallic and Ceramic Melts by Laminar Gas Streams at Supersonic Speeds, Powder Met. Int., Vol 25 (No. 2), 1992, p 59-65

11. S.A. Miller, L.A. Wojcik, R.S. Miller, D.P. Mourer, and R.W. Christensen, A Preliminary Investigation into the Use of Nonaxisymmetric Close-Coupled Nozzles, Advances in Powder Metallurgy and Particulate Materials, Vol 1, M. Phillips and J. Porter, Ed., Metal Powder Industries Federation/APMI, 1995, p 31-40

12. A. Ünal, Frictional Losses in Ultrasonic Gas Atomization Nozzles, Powder Metall., Vol 33 (No. 4), 1990, p 327-333

13. S.D. Ridder, S.A. Osella, P.I. Espina, and F.S. Biancaniello, Intelligent Control of Particle Size Distribution during Gas Atomization, Int. J. Powder Metall., Vol 28 (No. 2), p 133-147

14. S.D. Ridder and F.S. Biancaniello, Mater. Sci. Eng., Vol 98, 1989, p 47-51

15. W.R. Lane, Shatter of Drops in Streams of Air, Ind. Eng. Chem., Vol 43 (No. 6), 1951, p 1312-1317

16. S.P. Mates and G.S. Settles, A Flow Visualization Study of the Gas Dynamics of Liquid Metal Atomization Nozzles, Advances in Powder Metallurgy and Particulate Materials, Vol 1, M. Phillips and J. Porter, Ed., Metal Powder Industries Federation/APMI, 1995, p 15-29

17. A. Ünal, BET Surface Area and Morphology of Rapidly Solidified Aluminium Powders, Powder Metall., Vol 32, 1989, p 31-34

19. A. Ünal, M.J. Naylor, and H.B. McShane, Modelling of Metal Powder Production Using a Wax Atomiser, Powder Metall., Vol 33 (No. 3), 1990, p 259-268

0 0

Post a comment