References

1. Han, J.C., and Park, J.S., 1988, "Developing Heat Transfer in Rectangular Channel With Rib Turbulators," International Journal of Heat and Mass Transfer, Vol. 31, No. 1, pp. 183-195.

2. Wagner, J.H., Johnson, B.V., and Hajek, T.J., 1991a, "Heat Transfer in Rotating Passage With Smooth Walls and Radial Outward Flow," Journal of Turbomachinery, Vol. 113, pp. 42-51.

3. Wagner, J.H., Johnson, B.V., and Kooper, F.C., 1991b, "Heat Transfer in Rotating Serpentine Passage With Smooth Walls," Journal of Turbomachinery, Vol. 113, No. 3, pp. 321-330.

4. Parsons, J.A., Han, J.C., and Zhang, Y.M., 1995, "Effects of Model Orientation and Wall Heating Condition on Local Heat Transfer in a Rotating Two-Pass Square Channel With Rib Turbulators," International Journal of Heat and Mass Transfer, Vol. 38, No. 7, pp. 1151-1159.

5. Johnson, B.V., Wagner, J.H., Steuber, G.D., and Yeh, F.C., 1994b, "Heat Transfer in Rotating Serpentine Passage With Selected Model Orientations for Smooth or Skewed Trip Walls," ASME Journal of Turbomachinery, Vol. 116, pp. 738-744.

6. Dutta, S., and Han, J.C., 1996, "Local Heat Transfer in Rotating Smooth and Ribbed Two-Pass Square Channels with Three Channel Orientations," ASME Journal of Heat Transfer, Vol. 118, pp. 578-584.

7. Willett, F.T., and Bergles, A.E., 2000, "Heat Transfer in Rotating Narrow Rectangular Ducts with Heated Sides Oriented at 60° to the R-Z Plane," ASME Paper No. 2000-GT-224.

8. Griffith, T.S., Al-Hadhrami, L., Han, J.C., 2001, "Heat Transfer in Rotating Rectangular Cooling Channels with Angled Ribs," AIAA Paper No. 2001-2820.

9. Chyu, M.K., Yu, Y., and Ding, H., Downs, J.P., Soechting, O. 1997, "Concavity Enhanced Heat Transfer in an Internal Cooling Passage," ASME Paper No. 97-GT-437.

10. Moon, H.K., O'Connell, T., Glezer, B., 1999, "Channel Height Effect on Heat Transfer and Friction in a Dimpled Passage," ASME Paper No. 99-GT-163.

11. Mahmood, G.I., Hill, M.L., Nelson, D.L., Ligrani, P.M., Moon, H.-K., Glezer, B., 2001, "Local Heat Transfer and Flow Structure on and Above a Dimpled Surface in a Channel," Journal of Turbomachinery, Vol. 123, pp. 115-123.

12. Kline, S.J., and McClintock, F.A., 1953, "Describing Uncertainties in Single-Sample Experiments," Mechanical Engineering, Vol. 75

0 0

Post a comment