## References

[1] Han J. C., Glicksman L. R., and Rohsenow W. M., 1978, "An Investigation of Heat Transfer and Friction For Rib-Roughened Surfaces," International Journal of Heat and Mass Transfer, 21, No. 7, pp. 1143-1156.

[2] Han J.C., and Park J. S., 1988, "Developing Heat Transfer in Rectangular Channels With Rib Turbulators," International Journal of Heat and Mass Transfer, 31, No. 1, pp. 183-195.

[3] Han J. C., Zhang Y. M., and Lee C. P., 1991, "Augmented Heat Transfer in Square Channels With Parallel, Crossed, and V-Shaped Angled Ribs," ASME Transactions-Journal of Heat Transfer, 113, pp. 590-596.

[4] Han J.C., Huang J. J., and Lee C. P., 1993, "Augmented Heat Transfer in Square Channels With Wedge-Shaped and Delta-Shaped Turbulence Promoters," Enhanced Heat Transfer, 1, No. 1, pp. 37-52.

[5] Taslim M. E., Li T., and Kercher D. M., 1996, "Experimental Heat Transfer and Friction in Channels Roughened With Angled, V-Shaped, and Discrete Ribs on Two Opposite Walls," ASME Transactions-Journal of Turbomachinery, 118, pp. 20-28.

[6] Taslim M. E., Li T., and Spring S. D., 1998, "Measurements of Heat Transfer Coefficients and Friction Factors in Passages Rib-Roughened On All Walls," ASME Transactions-Journal of Turbomachinery, 120, pp. 564-570.

[7] Wang Z., Ireland P. T., Kohler S. T., and Chew J. W., 1998, "Heat Transfer Measurements to a Gas Turbine Cooling Passage With Inclined Ribs," ASME Transactions-Journal of Turbomachinery, 120, pp. 63-69.

[8] Thurman D., and Poinsatte P., 2000, "Experimental Heat transfer and Bulk Air Temperature Measurements for a Multipass Internal Cooling Model With Ribs and Bleed," ASME Paper No. 2000-GT-233.

[9] Cho H. H., Lee S. Y., and Wu S. J., 2001, "The Combined Effects of Rib Arrangements and Discrete Ribs on Local Heat/Mass Transfer in a Square Duct," ASME Paper No. 2001-GT-175.

[10] Johnson B. V., Wagner J. H., Steuber G. D., and Yeh F. C., 1994, "Heat Transfer in Rotating Serpentine Passage With Trips Skewed to the Flow," ASME Transactions-Journal of Turbomachinery, 116, pp. 113-123.

[11] Fann S., Yang W. J., and Zhang N., 1994, "Local Heat Transfer in a Rotating Serpentine Passage With Rib-Roughened Surfaces," International Journal of Heat and Mass Transfer, 37, No. 2, pp. 217-228.

[12] Parsons J. A., Han J. C., and Zhang Y. M., 1994, "Wall Heating Effect on Local Heat Transfer in a Rotating Two-Pass Square Channel With Rib Turbulators," International Journal of Heat and Mass Transfer, 37, No. 9, pp. 1411-1420.

[13] Johnson B. V., Wagner J. H., Steuber G. D., and Yeh F. C., 1994, "Heat Transfer in Rotating Serpentine Passage With Selected Model Orientations for Smooth or Skewed Trip Walls," ASME Transactions-Journal of Turbo-machinery, 116, pp. 738-744.

[14] Zhang Y. M., Han J. C., Parson J. A., and Lee C. P., 1995, "Surface Heating Effect on Local Heat Transfer in a Rotating Two-Pass Square Channel With 60 ° Angled Rib Turbulators," ASME Transactions-Journal of Turbo-machinery, 117, pp. 272-280.

[15] Parsons J. A., Han J. C., and Zhang Y. M., 1995, "Effects of Model Orientation and Wall Heating Condition on Local Heat Transfer in a Rotating Two-Pass Square Channel With 90 ° Rib Turbulators," International Journal of Heat and Mass Transfer, 38, No. 7, pp. 1151-1159.

[16] Dutta S., and Han J. C., 1996, "Local Heat Transfer in Rotating Smooth and Ribbed Two-Pass Square Channels With Three Channel Orientations," ASME Trans actions-Journal of Heat Transfer, 118, pp. 578-584.

[17] Park C. W., Lau S. C., and Kukreja R. T., 1997, "Effect of Rib Size on Heat (Mass) Transfer Distribution in a Rotating Channel," ASME Paper No. 97-AA-126.

[18] Park C. W., Lau S. C., and Kukreja R. T., 1998, "Heat (Mass) Transfer in a Rotating Channel With Ribs of Various Sizes on Two Walls," AIAA Journal of Thermophysics and Heat Transfer, 12, pp. 452-455.

[19] Taslim M. E., Rahman A., and Spring S. D., 1991, "An Experimental Investigation of Heat Transfer Coefficients in a Spanwise Rotating Channel With Opposing Rib-Roughened Walls," ASME Transactions-Journal of Turbomachinery, 113, pp. 75-82.

[20] Taslim M. E., Bondi L. A., and Kercher D. M., 1991, "An Experimental Investigation of Heat Transfer in an Orthogonally Rotating Channel Roughened With 45 ° Criss-Cross Ribs on Two Opposite Walls," ASME Transactions-Journal of Turbomachinery, 113, pp. 346-353.

[21] Azad G. S., Uddin M. J., Han J. C., Moon H.-K., and Glezer B., 2001, "Heat Transfer in a Two-Pass Rectangular Rotating Channel With 45 ° Angled Rib Turbulators," ASME Paper No 2001-GT-186.

[22] Dutta S., Han J. C., and Lee C. P., 1996, "Local Heat Transfer in a Rotating Two-Pass Ribbed Triangular Duct With Two Model Orientations," International Journal of Heat and Mass Transfer, 39, pp. 707-715.

[23] Bonhoff B., Parneix S., Leusch J., Johnson B. V., Schabacker J., and Bolcs A., 1999, "Experimental and Numerical Study of Developed Flow and Heat transfer in Coolant Channels With 45 ° Ribs," International Journal of Heat and Fluid Flow, 20, pp. 311-319.

[24] Schabacker J., Bolcs A., and Johnson B. V., 1999, "PIV Investigation of the Flow Characteristics in an Inter- nal Coolant Passage With 45 ° Rib Arrangement," ASME Paper 99-GT-120.

[25] Tse D. G. N., and Steubner G. D., 1997, "Flow in a Rotating Square Serpentine Coolant Passage With Skewed Trips," ASME Paper 97-GT-529.

[26] Prabhu S. V., and Vedula R. P., 1997, "Pressure Drop Distribution in a Rotating Rectangular Channel With One Ribbed Surface," ASME Paper No. 97-AA-118.

[27] Prakash C., and Zerkle R., 1995, "Prediction of Turbulent Flow and Heat Transfer in a Ribbed Rectangular Duct With and Without Rotation," ASME Transactions-Journal of Turbomachinery, 117, pp. 255-264.

[28] Stephens M. A., Chyu M. K., and Shih T. I.-P., 1996, "Computations of Convective Heat Transfer in a Square Duct With Inclined Ribs of Rounded Cross Section," ASME Paper No. 96-WA/HT-12.

[29] Bonhoff B., Tomm U., Johnson B. V., and Jennions I., 1997, "Heat Transfer Predictions For Rotating U-Shaped Coolant Channels With Skewed Ribs and With Smooth Walls," ASME Paper No. 97-GT-162.

[30] Rigby D. L., Steinthorsson E., and Ameri A. A., 1997, 'Numerical Prediction of Heat Transfer in a Channel With Ribs and Bleed," ASME Paper No. 97-GT-431.

[31] Stephens M. A., and Shih T. I.-P., 1997, "Computation of Compressible Flow and Heat Transfer in a Rotating Duct With Inclined Ribs and 180 Degree Bend," ASME Paper No. 97-GT-192.

[32] Shih T. I.-P., Lin Y.-L., Stephens M. A., and Chyu M. K., 1998, "Flow and Heat Transfer in a Ribbed U-Duct Under Typical Engine Conditions," ASME Paper No. 98-GT-213.

[33] Iacovides H., 1998, "Computation of Flow and Heat Transfer Through Rotating Ribbed Passage," International Journal of Heat and Fluid Flow, 19, pp. 393-400.

[34] Rigby D. L., 1998, "Prediction of Heat and Mass Transfer in a Rotating Ribbed Coolant Passage With a 180 Degree Turn," ASME Paper No. 98-GT-329.

[35] Jang Y.-J., Chen H.-C., and Han J. C., 2000, "Flow and Heat Transfer in a Rotating Square Channel With 45 ° Angled Ribs by Reynolds Stress Turbulence Model," ASME Paper No. 2000-GT-229.

[36] Al-Qahtani M., Jang Y., Chen H. C., and Han J. C., 2001, "Prediction of Flow and Heat Transfer in Rotating Two-Pass Rectangular Channels With 45 ° Rib Turbula-tors," ASME Paper No 2001-GT-187.

[37] Mahmood G. I., Hill M. L., Nelson D. L., Ligrani P. M., Moon H.-K., and Glezer B., 2001, "Local Heat Transfer and Flow Structure On and Above a Dimpled Surface in a Channel," ASME Transactions-Journal of Turbomachinery, 123, pp. 115-123.

[38] Sargent S. R., Hedlund C. R., and Ligrani P. M., 1998, "An Infrared Thermography Imaging System For Convective Heat Transfer Measurements in Complex Flows," Measurement Science and Technology, 9, No. 12, pp. 1974-1981.

[39] Ligrani P. M., Singer B. A., and Baun L. R., 1989, "Miniature Five-Hole Pressure Probe for Measurement of Three Mean Velocity Components in Low Speed Flow," Journal of Physics E-Scientific Instruments, 22, No. 10, pp. 868-876.

[40] Ligrani P. M., Singer B. A., and Baun L. R., 1989, "Spatial Resolution and Downwash Velocity Corrections for Multiple-Hole Pressure Probes in Complex Flows," Experiments in Fluids, 7, No. 6, pp. 424-426.

[41] Ligrani P. M., 2000, "Flow Visualization and Flow Tracking as Applied to Turbine Components in Gas Turbine Engines," Measurement Science and Technology, 11, No. 7, pp. 992-1006.

[42] Kline S. J., and McClintock F. A., 1953, "Describing Uncertainties in Single Sample Experiments," Mechanical Engineering, 75, pp. 3-8.

[43] Moffat R. J., 1988, "Describing the Uncertainties in Experimental Results," Experimental Thermal and Fluid Science, 1, No. 1, pp. 3-17.

[44] Gee D. L., and Webb R. L., 1980, "Forced Convection Heat Transfer in Helically Rib-Roughened Tubes," International Journal of Heat and Mass Transfer, 23, pp. 1127-1136.

## Post a comment