Reference

1. Han, J. C. and Park, J. S., 1988, "Developing Heat Transfer in Rectangular Channel with Rib Turbulators," Int. J. Heat and Mass Transfer,. 31, No. 1, pp. 183-195.

2. Han, J. C., Zhang, Y. M. and Lee, C. P., 1991, "Augmented Heat Transfer in Square Channels with Parallel, Crossed, and V-Shaped Angled Ribs," ASME Journal of Heat Transfer, 113, pp. 590-596.

3. Ekkad S.V. and Han, J. C., 1997, "Detailed Heat Transfer Distributions in Two-pass square Channels with Rib Turbulators," Int. J. Heat and Mass Transfer,. 40, No.11, pp. 2525-2537.

4. Liou T.-M. Tzeng, Y.-Y., and Chen, C.-C., 1998, "Fluid Flow in a 180 Deg Sharp Turning Duct with Different Divider Thicknesses," ASME Paper 98-GT-189.

5. Wagner, J. H., Johnson, B. V. and Kopper, F. C., 1991, "Heat transfer in Rotating Serpentine Passage with Smooth Walls", ASME J. of Turbomachinery, 113, No. 3, pp.321-330

6. Dutta, S. and Han, J. C., 1996, "Local Heat Transfer in Rotating Smooth and Ribbed Two-Pass Square Channels with Three Channel Orientations", ASME J. of Heat Transfer, 118, No.3, pp. 578-584.

7. Soong, C. Y., Lin, S. T., and Hwang, G. J., 1991, "An Experimental Study of Convective Heat Transfer in Radially Rotating Rectangular Ducts," ASME J. of Heat Transfer, 113, pp. 604-611.

8. Azad, GM S., Uddin, M. J., Han, J. C., Moon, H. K., and Glezer, B., 2001, "Heat Transfer in Two-Pass Rectangular Rotating Channels with 45° Parallel and Crossed Rib Turbulators" ASME Paper 2001-GT-0186.

9. Wagner, J. H., Johnson, B. V., Graziani, R. A., and Yeh, F. C., 1992, "Heat Transfer in Rotating Serpentine Passages with Trips Normal to the Flow," ASME J. of Turbomachinery, 114, No. 4, pp. 847-857.

10. Johnson, B. V., Wagner, J. H., Steuber, G. D., and Yeh, F. C., 1994a, "Heat Transfer in Rotating serpentine Passage with Trip s Skewed to the Flow," ASME J. of Turbomachinery, 116, pp.113-123.

11. Johnson, B. V., Wagner, J. H., Steuber, G. D., and Yeh, F. C., 1994b, "Heat Transfer in Rotating serpentine Passage with selected Model Orientations for Smooth or Skewed Trip Walls," ASME J. of Turbomachinery, 116, pp. 738-744.

12. Parsons, J. A., Han, J. C., and Zhang, Y. M., 1995, "Effects of Model Orientation and Wall Heating Condition on Local Heat Transfer in a Rotating Two-Pass Square Channel with Rib Turbulators," Int. J. Heat Mass Transfer, 38, No.7, pp. 1151-1159.

13. Zhang, Y. M., Han, J. C., Parsons, J. A., and Lee, C. P., 1995, "Surface Heating Effect on Local Heat Transfer in a Rotating Two-pass Square Channel with 60 deg Angled Rib Turbulators," ASME J. of Turbomachinery, 117, pp. 272-280.

14. Griffith, T. S., Al-Hadhrami, L. and Han, J. C., 2001, "Heat Transfer in Rotating Rectangular Cooling Channels with Angled Ribs," AIAA Paper 2001-2820.

15. Iacovides, H. and Launder, B.E., 1991, "Parametric and Numerical Study of Fully Developed Flow and Heat Transfer in Rotating Rectangular ducts," ASME J. of Turbomachinery,.113, pp. 331-338.

16. Prakash, C. and Zerkle, R., 1992, "Prediction of Turbulent Flow and Heat Transfer in a Radially Rotating square Duct," ASME J. of Turbomachinery, 114, No. 4, pp. 835-846.

17. Dutta, S., Andrews. M. J. and Han, J. C., 1996, "Prediction of turbulent heat transfer in rotating smooth square ducts," Int. J. Heat Mass Transfer, 39, No. 12, pp. 2505-2514.

18. Bo, T., Iacovides, H. and Launder, B. E., 1995, "Developing Buoyancy-Modified Turbulent Flow in Ducts Rotating in Orthogonal Mode," ASME J. of Turbomachinery, 117, No. 3, pp. 474-484.

19. Sathyamurthy, P. S., Karki, K. C. and Patankar, S. V., 1994, "Prediction of Turbulent Flow and Heat Transfer in a Rotating Square Duct with a 180 Deg. Bend," ASME Paper 94-GT-197.

20. Stephens, M. A., Shih, T. I.-P. and Civinskas, K. C., 1996, "Computations of Flow and Heat Transfer in a Rotating U-Shaped Square Duct with Smooth Walls," AIAA-96-316.

21. Iacovides, H., Launder, B. E. and Li, HY., 1996, "The computation of flow development through stationary and rotating U-ducts of strong curvature," Int. J. Heat and Fluid Flow, 17, No. 1, pp.22-33.

22. Bonhoff, B., Tomm, U., Johnson, B. V. and Jennions, I., 1997, "Heat Transfer Predictions For Rotating U-Shaped Coolant Channels with Skewed Ribs and with Smooth Walls," ASME Paper 97-GT-162.

23. Chen, H. C., Jang, Y. J., and Han, J. C., 2000, "Computation of heat transfer in rotating two-pass square channels by a second-moment closure model," Int. J. Heat and Mass Transfer, 43, No. 9, May, pp.1603-1616

24. Chen, H. C., Jang, Y. J., and Han, J. C., 2000, "Near-Wall Second-Moment Closure for Rotating Multi-pass Cooling Channels," Journal of Thermophysics and Heat Transfer, 14, No. 2, pp.201-209.

25. Al-Qahtani, M. S., Jang, Y. J., Chen, H. C., and Han, J. C., 2001, "Flow and Heat Transfer in Rotating Two-Pass Rectangular Channels (AR = 2) by Reynolds Stress Turbulence Model," accepted for publication in Int. J. Heat and Mass Transfer.

26. Stephens, M. A., Shih, T. I-P., and Civinskas, K. C., 1995, "Computation of Flow and Heat Transfer in a Rectangular Channel with Ribs," AIAA Paper 95-0180.

27. Stephens, M. A., Chyu, M. K., and Shih, T. I-P., 1996, "Computation of Convective Heat Transfer in a Square Duct with Inclined Ribs of Rounded Cross Section," ASME Paper 96-WA/HT-12.

28. Stephens, M. A. and Shih T. IP., 1997, "Computation of Compressible Flow and Heat Transfer in a Rotating Duct with Inclined Ribs and 180Deg Bend," ASME Paper 97-GT-192.

29. Prakash, C. and Zerkle, R., 1995, "Prediction of Turbulent Flow and Heat Transfer in a Ribbed Rectangular Duct with and without Rotation," ASME J. of Turbomachinery, 177, pp. 255-264.

30. Iacovides, H., 1998, "Computation of Flow and Heat Transfer Through Rotating Ribbed Passage," International J. of Heat and Fluid Flow, 19, pp. 393-400.

31. Jang, Y. J., Chen, H. C., and Han, J. C., 2001a, "Computation of Flow and Heat Transfer in Two-Pass Channels with 60° Ribs," ASME J. of Heat Transfer, 123, No. 3, pp. 563-575.

32. Jang, Y. J., Chen, H. C., and Han, J. C., 2000, "Numerical Prediction of the Flow and Heat Transfer in a Two-Pass Square Duct with 90° Ribs," The 8th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-8), Honolulu, HI, March 26-30, 1, pp. 580-587.

33. Jang, Y. J., Chen, H. C., and Han, J. C., 2001b, " Flow and Heat Transfer in a Rotating Square Channel with 45° Angled Ribs by Reynolds Stress Turbulence Model," ASME J. of Turbomachinery, 123, No. 1, pp. 124-132.

34. Al-Qahtani, M. S., Jang, Y. J., Chen, H. C., and Han, J. C., 2001, "Prediction of Flow and Heat Transfer in Rotating Two-Pass Rectangular Channels with 45 Rib Turbulators," ASME Paper 2001-GT-0187.

35. Chen, H. C., Patel, V. C., Ju, S., 1990, "Solutions of Reynolds-Averaged Navier-Stokes Equations for Three-Dimensional Incompressible Flows," J. of Computational Physics, 88, No. 2, 305-336.

36. Chen, H. C. and Patel, V. C., 1989, "The Flow Around Wing-Body Junctions", Proceedings of the 4th Symposium on Numerical and Physical Aspects of Aerodynamic Flows, Long Beach, CA.

37. Chen, H. C. and Chen, M., 1998, "Chimera RANS Simulation of a Berthing DDG-51 Ship in Translational and Rotational Motions", International J. of Offshore and Polar Engineering, 8, No. 3, pp.182-191.

38. GRIDGEN User Manual, Version 13.3, Pointwise Inc., 1999.

39. Rohsenow, W. M., and Choi, H., 1961, Heat, Mass and Momentum Transfer, Prentice-Hall, Englewood Cliffs, NJ.

0 0

Post a comment