References

Aude TC, NT Cowper, and CT Crowe et al. Slurry piping systems: Trends, design methods, guidelines. Chem Eng, June 28, 1971, p 74.

Baker O. Simultaneous flow of oil and gas. Oil Gas J, 53:185-195, 1954.

Baroczy CJ. A systematic correction for two-phase pressure drop. CEP Symp Ser 62(44): 232-249, 1966.

Brodkey RS. the Phenomena of Fluid Motions, Reading, MA: Addison-Wesley, 1967.

Butterworth D, GF Hewitt, eds. Two-Phase Flow and Heat Transfer. Oxford, UK: Oxford Universits Press, 1977.

Chisholm D. Two-Phase Flow in Pipelines and Heat Exchangers. London: The Institution of Chemical Engineers. George Godwin, 1983.

CCPS (Center for Chemical Process Safety). Guidelines for Pressure Relief and Effluent Handling Systems. New York: AIChE, 1998.

Darby R. Hydrodynamics of slurries and suspensions. In: NP Cheremisinoff, ed. Encyclopedia of Fluid Mechanics, Vol. 5. Houston, TX: Gulf Pub 1985, pp 49-92.

Duckler AE, M Wicks III, RG Cleveland. Frictional pressure drop in two-phase flow: A. A comparison of existing correlations for pressure loss and holdup. AIChE J 10:38-43, 1964a.

Duckler AE, M Wicks III, RG Cleveland. Frictional pressure drop in two-phase flow: B. An approach through similarity analysis. AIChE J. 10:44-51, 1964b.

Fan L-S, C Zhu. Principles of Gas-Solid Flows. London: Cambridge Univ Press,1998.

Fauske HK. Contribution to the Theory of Two-Phase, One-Component Critical Flow, Argonne Natl Lab Rep SNL-6673, October 1962.

Ferguson MEG, PL Spedding. Measurement and prediction of pressure drop in two-phase flow. J Chem Technol Biotechnol 62:262-278, 1995.

Govier GW, K Aziz. The Flow of Complex Mixtures in Pipes. New York: Van Nostrand Reinhold, 1972.

Hanks RW. ASME Paper No. 80-PET-45. ASME Energy Sources Technol Conf New Orleans, LA, Feb 3-7, 1980.

Hetsroni G, ed. Handbook of Multiphase Systems. Washington, DC: Hemisphere, 1982.

Hewitt GF, DN Roberts. Studies of Two-Phase Flow Patterns by X-Ray and Flash Photography. Report AERE-M 2159. London: HMSO, 1969.

Hinkel BL. PhD Thesis, Georgia Institute of Technology, 1953 Atlanta, Ga.

Holland FA, DR Bragg. Fluid Flow for Chemical Engineers. 2nd ed. Edward Arnold, 1995.

Hughmark, GA. Holdup in gas-liquid flow. CEP, 58(4):62-65, 1962.

Jamerson SC, HG Fisher. Using constant slip ratios to model non-flashing (frozen) two-phase flow through nozzles. Process Safety Prog 18(2): 89-98, 1999.

Klinzing GE, RD Marcus, F Rizk, LS Leung. Pneumatic Conveying of Solids. 2nd ed. New York: Chapman and Hall, 1997.

Leung JC. Easily size relief devices and piping for two-phase flow. CEP, December 1996, pp 28-50.

Levy S. Two-Phase Flow in Complex Systems. New York: Wiley, 1999.

Lockhart RW, RC Martinelli. Proposed correlation of data for isothermal two-phase, two-component flow in pipes. CEP, 45 (1): 39-48, 1949.

Molerus O. Principles of Flow in Disperse Systems. New York: Chapman and Hall, 1993.

Moody FJ. Maximum flow rate of a single component two-phase mixture. Trans ASME, J Heat Transfer. February, 1965, pp 134-142.

Mukherjee H, JP Brill. Liquid holdup correlations for inclined two-phase flow. J Petrol Tech May 1983, pp 1003-1008.

Rizk F. Dissertation, University of Karlsruhe, 1973.

Rouhani SZ, MS Sohal. Two-phase flow patterns: A review of research results. Prog Nucl Energy 11(3): 219-259, 1983.

Shook CA, MC Roco. Slurry Flow: Principles and Practice. Stoneham, MA: Butterworth-Heinemann, 1991.

Taitel Y, AE Duckler. A model for predicting flow regime transitions in horizontal and near horizontal gas-liquid flow. AIChE J 22(1): 47-55, 1976.

Thom JRS. Prediction of pressure drop during forced circulation boiling of water. Int J Heat Mass Transfer 7:709-724, 1964.

Wallis GB. One-Dimensional Two-Phase Flow. New York: McGraw-Hill, 1969.

Wasp EJ, JP Kenny, RL Gandhi. Solid-Liquid Flow in Slurry Pipeline Transportation. Clausthal, Germany: Trans-Tech, 1977.

Yang WC. Powder Technol 35:143-150, 1983.

0 0

Post a comment