Cost

The cost of copper plating is influenced largely by the type of installation. In a modern, automated, multiple-phase shop, brighteners and wetting agents probably are the greatest cost factor. In a still-tank operation, the cost of labor is of major importance. An increase in current density reduces cost because of the reduction in time required to deposit a given thickness of coating.

For a routine plating operation, the cost of the copper deposited can be estimated with the aid of Fig. 5. For example, Fig. 5 shows that 120 g (4 oz) of copper is required for plating an area of 0.7 m2 (7 ft2) with a coating 20 ^m (0.8 mil) thick. The cost of the copper coating is obtained by multiplying the weight of copper required by the cost of copper anodes. For areas larger than 2.4 m2 (10 ft2), multiply by the proper factor.

Fig. 5 Copper required for covering an area with a specific thickness

Industrial (Hard) Chromium Plating

Revised by Kenneth R. Newby, Atotech USA

0 0

Post a comment