References

1. D. S. Yan, X. R. Fu, and S. X. Shi (Eds.), 5th International Symposium on Ceramic Materials and Components for Engines, World Scientific, Singapore, 1994.

2. V. J. Tennery, Third International Symposium on Ceramic Materials and Components for Engines, American Ceramic Society, Westerville, OH, 1988.

3. D. C. Larsen, J. W. Adams, L. R. Johnson, A. P. Teotia, and L. S. Hill, Ceramic Materials for Advanced Heat Engines, Noyes, Park Ridge, OH, 1985.

4. P. P. Lutton and B. Ben-Nissan, Mat. Tech., 12(2), 59-64 (1997).

5. P. P. Lutton and B. Ben-Nissan, Mat. Tech., 12(3/4), 107-111 (1997).

6. J. F. Shackelford, Bioceramics: Applications of Ceramic and Glass Materials in Medicine, Trans. Tech., Enfield, NH, 1999.

7. L. L. Hench, J. Am. Cer. Soc., 74(7), 1487-1510 (1991).

8. J. J. Schuldies and J. A. Branch, Cer. Ind., 138(5), 43-46 (1992).

9. W. A. Weibull, J. Appl. Mech., 18(3), 293-297 (1951).

10. P. N. Murthy, S. K. Mital, and A. R. Shah, Probabilistic Mircomechanics and Macromechanics for Ceramic Matrix Composites, A collection of technical papers: AIAA/ASME/ASCE/AHSASC 38th Structures, Structural Dynamics and Materials Conference, April 7-10, Kissimmee, FL, pp. 2532-2542.

11. Conference on Nondestructive Evaluation of Modern Ceramics, Am. Soc. Nondestructive Testing, Columbus, OH, 1990.

12. Conference on Nondestructive Testing of High-Performance Ceramics, American Ceramic Society, Westerville, OH, Ohio, 1987.

13. L. Goebbels and H. Reiter, in W. Bunk (Ed.), Keramische Komponenten fur FahrzeugGasturbinen, Vol. II, Springer, Berlin, 1983.

14. J. J. Schuldies and D. W. Richerson, in J. W. Fairbanks and R. W. Rice (Eds.), Proc. 1977, DARPA/NAVSEA Ceramic Gas Turbine Demonstration Engine Program Review, Metals and Ceramics Info. Center, Battelle Laboratories, Columbus, OH, 1978, pp. 381-402.

15. K. Nakajima, J. Japanese Trade and Industry, 5 (1983).

16. W. A. Ellingson and M. W. Vannier, X-ray Computed Tomography for Nondestructive Evaluation of Advanced Structural Ceramics, Argonne National Laboratory Report, ANL-87-52, 1987.

17. T. Rabe, J. Goebbels, A. Kunzmann, and H. Riesemeier, "Quantitative Determination of Density Gradients by Three-Dimensional Computer-Tomography," in Proc. 5th European Ceramic Soc. Conf., 132-136, 730-733 (1997).

18. J. Hsieh, O. E. Gurmen, and K. E. King, IEEE Trans. Med. Imag., 19(9), 930-940 (2000).

19. J. N. Panzarino, "NDE and Advanced Ceramics," in Conf. on NDE of Modern Ceramics, Am. Soc. for Nondestructive Testing, Columbus, OH, 1990, pp. 12-15.

20. S. Natenson, "Nondestructive Evaluation of Powders for Advanced Ceramics," in Proc. Conf. on Nondestructive Evaluation of High-Performance Ceramics, Am. Cer. Soc., Westerville, OH, 1987, pp. 73-87.

21. W. A. Ellingson, R. A. Roberts, M. W. Vannier, J. C. Ackerman, B. D. Sawicka, S. Gronemeyer, and R. J. Friz, Recent Developments in Nondestructive Evaluation for Structural Ceramics, Argonne National Laboratory Report ANL/FE-87-2, 1987.

22. K. E. Amin and T. P. Leo, "Radiographic Detectability Limits for Seeded Defects in Both Green and Densified Silicon Nitride," in Proc. Conf. On Nondestructive Evaluation of High-Performance Ceramics, Am. Cer. Soc., Westerville, OH, 1987, pp. 211-232.

23. D. W. Richerson, Modern Engineering Ceramics: Properties, Processing and Use in Design, 2nd ed., Marcel Dekker, New York, 1992.

24. H. C. Yeh, J. M. Wimmer, M. R. Huang,M. E. Rovabaugh, J. Schienle,andK. H. Styhr, Improved Silicon Nitride for Advanced Heat Engines, National Aeronautics and Space Administration Report, NASA-CR-175006, 1985.

25. W. A. Ellingson, J. L. Ackerman, L. Garrido, P. S. Wong, and S. Gronemeyer, Development of Nuclear Magnetic Resonance Imaging Technology for Advanced Ceramics, Argonne National Laboratory Report, ANL-87-53, 1987.

26. K. A. Carduner, G. R. Hatfield, W. A. Ellingson, and S. L. Dieckman, "Nuclear Magnetic Resonance Spectroscopy and Imaging of High-Performance Ceramics," in N. P. Cheremisinoff (Ed.), Handbook of Ceramics and Composites, Vol. 2, Mechanical Properties and Specialty Applications, Marcel Dekker, New York, 1992, pp. 465-502.

27. K. Hayashi and K. Kawashima, J. Phys. D, App. Phys., 21(6), 1037-1039 (1988).

28. P. McIntire (Ed.), Nondestructive Testing Handbook, Am. Soc. for Nondestructive Testing, Columbus, OH, 1990.

29. P. R. Grantors and R. Aufrichtig, "DQE(f) of an Amorphous-Silicon Flat Panel X-ray Detector: Detector Parameter Influences and Measurement Methodology," in J. T. Dobbins III and J. M. Boone (Eds.), Proc. of 2000 Conf. On Medical Imaging, SPIE, Vol. 3977, Bellingham, WA, 2000, pp. 2-13.

30. S. A. Horton, "Detection of Surface Defects in Ceramic Rolling Elements," Fourth Int. Symp. on Ceramic Materials and Components for Engines, Goteborg, Sweden, 1991, pp. 897-904.

31. H. Domon, K. Uemura, and K. Fujiwara, "Liquid Penetrant Test for Fine Ceramics," Proc. Eight Asia-Pacific Conference on Nondestructive Testing, Taipai, Taiwan, 1995, pp. 711-718.

32. S. Jahanmir, M. Ramulu, and P. Koshy, Machining of Ceramics and Composites, Marcel Dekker, New York, 1999.

33. S. Jahanmir, Machining of Advanced Materials, National Institute of Science and Technology (NIST), NIST Special Publication 847, 1993.

34. R. E. Barks, K. Subramanian, and K. E. Ball, Intersociety Symposium on Machining of Advanced Ceramic Materials and Components, Am. Cer. Soc., Westerville, OH, 1987.

35. W. A. Ellingson, J. A. Todd, and J. G. Sun, Optical Method and Apparatus for Detection of Defects and Microstructural Changes in Ceramics and Ceramic Coatings, US Patent 6,285,449, issued Sept. 2001.

36. J. G. Sun, M. H. Haselkorn, and W. A. Ellingson, "Laser Scattering Detection of Machining-Induced Damage in Si3N4 Components," in R. E. Green, Jr. (Ed.), Nondestructive Characterization of Materials, Vol. VIII, Plenum, New York, 1998, pp. 365-370.

37. I. Fujii and K. Kawashima, Rev. Prog. in Quan. NDE, 14, 203-209 (1995).

38. W. A. Ellingson, E. R. Koehl, D. Sandberg, P. Pastila, A. P. Nikkila, and T. A. Mantyla, "Acousto-Ultrasonic Nondestructive Evaluation of Rigid Ceramic Hot-Gas Filters," in Euro Ceramics, Vol. VII, Key Eng. Mat. Vols. 206-213, Trans. Tech. Pubs, Switzerland, 2002, pp. 613-616.

39. P. Plastila, A. P. Nikkila, T. Mantyla, W. A. Ellingson, E. R. Koehl, and D. Sandberg, Cer. Eng. Sci. Proc. (2002).

40. A. Tiwari and E. G. Henneke, in R. E. Green, Jr., K. J. Kozacek and C. O. Rudd (Eds.), Nondestructive Characterization of Materials, Vol. VI, Plenum, New York, 1994, pp. 247-254.

41. H. Reis, "Acousto-ultrasonic Nondestructive Evaluation of Porosity in Graphite Fiber Reinforced PMR-15 Composite Panels," in W. J. McGonnagle (Ed.), Intl. Advances in Nondestructive Testing, Gordon and Breach, Longhorn, PA, 1994.

42. A. G. Evans and R. Naslain, "High-Temperature Ceramic-Matrix Composites I: Design, Durability and Performance," in Cer. Trans., Vol. 57, Am. Cer. Soc., Westerville, OH, 1995.

43. A. G. Evans and R. Naslain, "High-Temperature Ceramic-Matrix Composites II: Manufacturing and Materials Development," in Cer. Trans., Vol. 58, Am. Cer. Soc., West-erville, OH, 1995.

44. A. Russell, L. Mollinex, M. Holmquist, and O. Sudre, Oxide/oxide Ceramic Matrix Composites in Gas Turbine Combustors, ASME Paper 98-GT-30, 1998.

46. R. A. Lowden, M. K. Ferber, J. R. Hellman, K. K. Chawla and S. G. Pietio, Ceramic Matrix Composites—Advanced High Temperature Structural Materials, Mat. Res. Soc, Vol. 365, 1995.

47. J. G. Sun, T. E. Easler, A. Szweda, T. A. K. Pillai, C. Deemer, and W. A. Ellingson, Cer. Eng. Sci. Proc, 20(3), 200-210 (1999).

48. W. A. Gradia and C. M. Fortunko, Proc. IEEE Ultrasonic Symp., 1, 697-709 (1995).

49. C. Wykes, Nondestr. Test. Eval., 12, 155-180 (1995).

50. W. P. Winfree and P. H. James, "Thermographic Detection of Disbonds," Proc. 35th Int. Instru. Symp, 1989, pp. 183-188.

51. J. G. Sun,C. Deemer, W. A. Ellingson,T. E. Easler, A. Szweda, andP. Craig, "Thermal Imaging Measurement and Correlation of Thermal Diffusivity in Continuous Fiber Ceramic Composites," in P. S. GaalandD. E. Apostolescu(Eds)., Thermal Conductivity V. 24, Technomic Pub., Lancaster, PA, 1997, pp. 616-622.

52. P. Cielo, R. Lewak, X. Maldague, and M. Lamontagne, J. Canadian Soc Nondestructive Testing, 7(2), 30-49 (1986).

53. T. W. Spohnholtz, Development of Impact Resonant Spectroscopy for Characterizing Structural Ceramic Components, MS Thesis, University of Illinois-Chicago, 1999.

54. R. A. Bemis, K. Shiloh, and W. A. Ellingson, Trans. ASME, J. Eng. Gas Turbines Power, 118, 491-424 (1998).

55. W. J. Parker, R. J. Jenkins, C. P. Butler, and G. L. Abbott, J. App. Phys. 32, 1679-1684 (1961).

56. J. Price, O. Jimenez, V. J. Parthasarthy, N. Miryala, and D. Levoux, Ceramic Stationary Gas Turbine Development Program, Seventh Annual Summary, ASME Paper 2000-GT-75, 2000.

57. H. E. Eaton, G. Linsey, E. Sun, K. L. More, J. Kimmel, J. Price, and N. Miryala, EBC Protection for SiC/SiC Composites in the Gas Turbine Combustion Environment: Continuing Evaluation and Refurbishment Consideration, ASME Paper 2001-GT-513, 2001.

58. W. A. Ellingson, J. G. Sun, K. L. More, and R. G. Hines, Characterization of Melt-Infiltrated SiC/SiC Composite Liners Using Meso and Macro NDE Techniques, ASME Paper 2000-GT-0067, 2000.

59. G. G. Genge and M. W. Marsh, Carbon Fiber Reinforced/Silicon Carbide Turbine Blisk Testing in the SIMPLEX Pump, Proc. of the 49th Joint Army, Navy, Air Force (JANNAF) Meeting, 1999, pp. 89-97.

60. R. Talreja, J. of Strain Anal., 24(4), 215-222 (1989).

61. G. N. Morscher, Composite Sci. Tech., 59, 687-697 (1999).

62. I. A. Viktorov, Rayleigh and Lamb Waves, Physical Theory and Applications, Plenum, New York, 1969.

63. D. Krajcinovic, Appl. Mechanics Rev., 37(1), 1-6 (1984).

0 0

Post a comment