References

1. Balje, O. E., "Study on Design Criteria and Matching of Turbomachines, Part B: Compressor and Pump Performance and Matching of Turbocom-ponents," ASME Paper No. 60-WA-231, ASME Transactions, Vol. 84, Journal of Engineering for Power, January 1962, p. 107.

2. Boyce, Meherwan P., Gas Turbine Engineering Handbook, Houston, TX: Gulf Publishing Company, 1982.

3. Durham, F. P., Aircraft Jet Power Plates, Englewood Cliffs, NJ: Prentice-Hall. Inc., 1951.

4. Lapina, R. P., Escalating Centrifugal Compressor Performance, Process Compressor Technology, Vol. I, Houston, TX: Gulf Publishing Company, 1982.

5. Scheel, Lyman F., Gas Machinery, Houston, TX: Gulf Publishing Company, 1972.

6. Sheppard, D. G., Principles of Turbomachines, The MacMillan Co., 1956, pp. 60, 67, 9th Printing 1969, pp. 238-244.

7. Wiesner, F. J., "A Review of Slip Factors for Centrifugal Impellers,"' ASME 66-WA/FE-18, American Society of Mechanical Engineers, New York, NY, 1966.

8. Hallock, D. C., "Centrifugal Compressor, the Cause of the Curve," Air <£ (jas Engineering, January 1968.

9. Boyce, Meherwan P., et al, Practical Aspects of Centrifugal Compressor Surge and Surge Control, Proceedings of the 12th Turbomachinery Symposium, Purdue University, West Lafayette, IN, 1983, pp. 147-173.

10. Hackel, R. A. and King, R. F., "Centrifugal Compressor Inlet Piping—A Practical Guide," Compressed Air & Gas Institute, Vol. 4, No. 2.

11. Brown, Royce N., "Design Considerations for Maintenance Clearance Change Affecting Machine Operation," Dow Chemical USA, Houston, TX, 1976.

12. API Standard 617, Centrifugal Compressors for General Refinery Services, Sixth Edition, 1995, Washington, DC: American Petroleum Institute, 1979.

13. NEMA Standards Publication No. SM 23-1979, Steam Turbines for Mechanical Drive Service, National Electrical Manufacturers Association, Washington, DC, 1979.

14. Elliott Company, Compressor Refresher, Elliott Company, Houston, TX , pp. 3-29 (other pages)

15. Dugas, J. R., Southcott, J. F. and Tran, B. X., Adaptation of a Propylene Refrigeration Compressor With Dry Gas Seals, Proceedings of the 20th Turbomachinery Symposium, Texas A&M University, College Station, TX, 1991, pp. 57-61.

16. Feltman, P. L., Southcott, J. F. and Sweeney, J. M., Dry Gas Seal Retrofit, Proceedings of the 24th Turbomachinery Symposium, Texas A&M University, College Station, TX, 1995, pp. 221-229.

17. Bornstein, K. R. et al, Applications of Active Magnetic Bearings to High Speed Turbomachinery with Aerodynamic Rotor Disturbance, Proceedings of MAG '95 Magnetic Bearings, Magnetic Drives and Dry Gas Seals Conference, The Center for Magnetic Bearings, A Technology Development Center of the Center for Innovative Technology and the University lit Virginia, Charlottesville, VA, August 1995.

Living Off The Grid

Living Off The Grid

Get All The Support And Guidance You Need To Be A Success At Living Off The Grid. This Book Is One Of The Most Valuable Resources In The World When It Comes To When Living Within The Grid Is Not Making Sense Anymore.

Get My Free Ebook


Post a comment